CS SUS304 SUS310S Diesel Series Hot Air Furnace For chemical
industry , food industry
The fuel is burnt at firebox and the high temperature is produced.
The quantity of heat will conduct to air to be heated through heat
exchange device. Through heat exchange, the temperature of air is
dropped to less than 250.C and the air will be discharged. The air
to be heated is sent to hot air furnace through distribution blow
fan. After absorbed heat to the rated value, the air will be sent
from the vent of hot air. When the temperature of hot air reaches
the rated upper limit, the burner can stop or turn to small fire
automatically. When the temperature of hot air drops to the rated
low limit, the burner can burn or turn to big fire automatically.
For the hot air furnace, it has two types: direct-burnt type and
indirect-burnt type based on the heating way.
The furnace is widely used in Metal surface covering, coating the
Medicine, Grain processing, Foodstuff, Wood processing and Textile,
printing and dyeing in Chemical industry, Automobile and so on.
1. Are you a manufacturer ,trading company or a third party
We are a manufacturer ,and we have started our production on 1970
and have the private company right since 1995.
2. Where is your factory located
Our company is located in Changzhou city ,Jiansu province,China .it
is in the middle of Shanghai and nanjing .
3. How can I go to your factory ?
You can fly to shanghai pudong or hong qiao international airport
directly ,and then take the high speed train or bus to Changzhou
station and then we can pick you up at changzhou station for our
company . Our company is around 30~40km away from the changzhou
If you are in China now , you can fly to benniu airport ,or take
the train or bus to our city directly .
We sincerely welcome to visit our company at any time
4. What’s your mini order ?
Our mini order is one set .
5. Is there any certificate of YIBU ?
Yes, we got ISO9001:2008 Quality Management System
Certificate,ISO14001:2004 Environmental Management System
Certificate, OHSHS18001:2004 Occupatinal Healthe and Safety
Management System Certificate, ISO10012:2003 Certificate for the
system of Inspection measurement and Test, CE,
CE;SGS;TUV;GOST;UL;GMP also we got 60 item patent,
6. Is there any standard of electronic systems?
YES The electronic systems and their safety should comply with the
requirements set forth in 21 CFR Part 11 and GMP Annex 11; The data
should be collected at appropriate time intervals and stored in the
system in a fixed format that can be printed out/read;
Access to all input and output values should be provided by
entering the user personal code and password. The system should
ensure three-level access (Administrator-Supervisor-Operator). A
detailed description of the access rights for each level should be
included to the equipment functional specification (FS);